• The indoor unit shall feature WindFree™* mode. In cooling mode, as room temperature nears set temperature, the unit will close its louver and will disperse air into the space through thousands of micro-holes on the front of the indoor unit preventing cold air drafts on occupants
• The indoor unit shall be capable of sensing dust particulate matter in the air stream, and displaying the appropriate measured data on the unit's display
• The indoor unit shall have Wi-Fi capability as standard
• Outdoor unit shall provide 208/230V power to indoor unit via 14 AWG X 3 interconnect power cable
• Indoor unit chassis shall be UL94 V0 with a galvanized steel mounting bracket
• The indoor unit shall have easy-access to wire, pipe, and drain connections via access panel on the bottom of the unit for simple installation and service
• The outdoor unit shall be galvanized steel with a baked on powder coated finish for durability
• The heat exchangers shall be mechanically bonded fin to copper tube
• The compressor shall be hermetically sealed, inverter controlled, BLDC Rotary
• Refrigerant flow shall be controlled by an electronic expansion valve at the outdoor unit
• The indoor fan shall be a single, antibacterial cross-flow type
• Automatic (motorized) vertical swing (up/down) and horizontal swing (left/right) louvers
• The system shall have a built in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app (Android, iOS)
• Dual set temperature support when connected to MWR-WG00UN Advanced Wired Controller
• The indoor unit shall have a simple connection for overflow detection devices or any other normally closed contact for simple unit shutdown
• The indoor unit shall ship with a wireless controller, holder, and batteries
• Interconnect control wire between outdoor and indoor unit shall be 16AWG X 2

Samsung's exclusive WindFree™* cooling technology provides users with a cool indoor climate without the discomfort of direct cold airflow. It's an advantage no other system can match.