(954) 835-6010  |  Contact Us
Customer Portal Order History & Status Order Templates
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Welding Products Soldering 95/5 Wire Solder 1/8" Dia. X 1 lb. Spool

Harris Products Group

95/5 Wire Solder 1/8" Dia. X 1 lb. Spool

PART 331760
MFG 331760
Calculating price...
QUANTITY

About this item

  • Low temperature lead-free solder with narrow melting range
  • Rapid melting characteristics reqiure close fitting connections
  • 14,200 psi (Cu-to-Cu) tensile strength
  • 11,000 psi (Cu-to-Cu) shear strength
  • 38% elongation in 4"
  • 15 HB Brinell Hardness
  • Meets ASTM B-32 speficiations; Alloy Grade Sb5
  • Meets NSF/ANSI Standard 61 for drinking water system components - health effects
  • Meets NSF/ANSI Standard 372 for drinking water system components - lead content
  • Conforms to the EU Reach & RoHS directive

Tin antimony solder well-suited for applications where moderately elevated temperature is a factor. With higher electrical conductivity and high fluidity, 95/5 is recommended for lead-free installation of small diameter, tight fitting connections. Not recommended for use on brass or HVAC connections.

Specification Sheet
Specification Sheet
Catalog
Catalog
Brand Harris Products Group
Net Content 1 lb
Container Type Spool
Diameter .118" (3.00mm)
Melting Temperature 464 deg F
Composition 95% Tin, 5% Antimony
Color Gray/Silver metallic
Size 1 lb. spool
Shear Strength (PSI) 11,000 (Cu to Cu)
Tensile Strength (PSI) 14,200 (Cu to Cu)
Alloy Type Solder
Density 8.52 g/cm3
Chemical Composition Tin Remainder%
ModelName 95/5 Solder
Electrical Conductivity (%IACS) 11.9 @ 68 deg F (20 deg C)
Liquidus 464 deg F (240 deg C)
Solidus 450 deg F (233 deg C)
Electrical Resistivity (Microhm/Cm) 145 n Ohm-m at 77 deg F (25 deg C)
Elongation 38% in 4"
Recommended Flux Harris Water Soluble paste flux;Stay-Clean paste flux;Stay-Clean liquid flux (used with 4" or larger copper tubing and stainless steel)